C# Compiler Could Not Be Created

I was having memory-problems on my dev machine (2 Gigs don't go far these days), and after a few resets I was getting an exception whenever I tried to open a solution containing a C# project in VS2005. It told me the C# compiler could not be loaded, and I should reinstall VS.
Eh? No way. That's an entire day, getting it back to where I want it.
So I open the Help -> About to see if I can get some info about what's wrong. There I'm hit by a Package Load Failure, coming from ReSharper (we loves it). This looks like something.
A quick google for this, and I find Aaron Stebner has a possible solution. The tool he references in that post didn't find any problems, but running through the steps to re-build the native libraries did.
So these are the steps in case that blog ever disappears:

1. Open a cmd prompt
2. Run del %windir%\Assembly\NativeImages_v2.0.XXXXX_32\Microsoft.VisualStu#
   (where XXXXX is the build number of the .NET Framework 2.0 that
   you have installed - you can figure that out by looking at the name of
   the folder at %windir%\Microsoft.NET\Framework\v2.0.XXXXX)
3. Run %windir%\Microsoft.NET\Framework\v2.0.XXXXX\ngen.exe update /queue

That's done it. A restart of VS and we're up and running again. Now I just have to convince my boss I should get 2 more gigs of RAM.

Personal Information Numbers

A quick set of Regexes to check for Personal Information Numbers from the nordic countries.
I use these to check the format only, no fancy calculation of checksums etc.

• Norwegian: DDMMYYXXXXX
  

  \b[0-4]\d[014]\d{3}\d{5} 



• Swedish: YYMMDDCXXXX (C == '-' || '+')
  

  \b\d{2}[01]\d[0-3]\d[-\+]\d{4}



• Danish: DDMMYY-XXXX
  

  \b[0-3]\d[01]\d{3}-\d{4}



• Finnish: DDMMYYCZZZQ (C == '-'||'+'||'A' ; Q == [01234536789ABCDEFHJKLMNPRSTUVWXY])
  

  \b[0-3]\d[01]\d{3}[-\+A]\d{3}[0-9A-FHJ-NPR-Y]



• Icelandic: DDMMYY-XXXC (C == 0 || 9)
  

  \b[0-3]\d[01]\d{3}-\d{3}[09]

Podcasts

I listen to a lot of podcasts. What can I say, I bore easily. When I have to do something that's not social and takes more than a few minutes I often pop the earbuds in and start listening. My player, the Zen V 2Gb, is far too small to contain any music, and podcasts are a great way of getting some intelectual topping in the daily drudgery.

I thought I'd post the list of podcasts I enjoy regularly:

• CBC Radio Quirks and Quarks
  A great show about the stories breaking in science. Definitely a Canadian slant, and they've been running theme shows about Canada's carbon-footprint and such lately (which doesn't interest me that much), but still one of the greatest.


• FLOSS Weekly
  This show died for a while, but they're back with a vengeance. In-depth interviews with important people in the open-source world. Could it be better?


• In Our Time With Melvyn Bragg
  Melvyn is a delightfully pretentious British chap interviewing academics on interesting themes. Always interesting, and a really eclectic selection of themes.


• IT Conversations
  One of the really early podcasts, this is excellent quality. I listen to the entire feed, which I think syndicates a lot of other feeds. Great content from biomedical/genetics to philosophy and CTO-grade stuff. There's always something here you haven't heard about.


• Math Mutation
  This is a new one for me. Erik Seligman talks very briefly (3-5 minutes) about some interesting topics from the world of Math and Numbers. Good content!


• StarStuff with Stuart Gary
  I'm a sucker for the starry nights, and this recent discovery seems right up my alley. I've only listened to two yet, but I think it's a keeper!


• The Java Posse
  My favourite! The posse have weekly commentaries on the tech-world with a heavy java-slant. All the members are world-class developers with strong opinions and the arguments to back them up. It makes my day every time I see a new one pop into my playlist.


• The Skeptic's Guide to the Universe
  Tackling the idiocy and numb-thinking out there head on, the Skeptical Rogues are not afraid to delve deeply into any theme they find. It's so refreshing to see that there are intelligent people out there, not just nuts.


• This Week in Science - The Kickass Science Podcast
  Another recent discovery on my part. I'm not sure if this is a keeper yet. The themes seem interesting, but they're just not catching me yet. I'll keep them around for a few weeks, and see if they're worth it.


• This Week in Tech
  I've a feeling this is the big one. Leo Laporte is a great host, and he gets a lot of interesting punters. Whenever they talk about something I know they always manage to get it dead-wrong though, so I take their opinions with a grain of salt. Still, the show is a gem.

Definitely a Tech/Science slant, eh? Any others I should know about, or comments are much appreciated :)

CountDistinct - How About SumDistinct - Or Just AggregateDistinct?

Making a report in Microsoft SQL Server 2005 Reporting Services today I needed to sum up several levels in a table. However, the numbers where available only at an intermediate aggregated level, so I needed to sum up only the distinct sublevel-items. Got that? Maybe it's easier if I show an example:

Let's concoct an example here. I'm extracting data in the following groups: Firm, ProductType, Product, Account, Item. Say I'm summing up one measure, BalanceAmount, on products, but my dataset returns other measures on the lowest level, Item.

Here's an example DataSet

Firm	ProductType	Product	Account	Item	BalanceAmount	ItemMeasure
Acme	Explosive	Nitroglyserin	C-001	Bottle	$200	$2.14
Acme	Explosive	Nitroglyserin	C-001	Mug	$200	$4.87
Acme	Explosive	TNT	C-001	Stick	$200	$0.79
Acme	Explosive	Plastique	C-001	Wad	$200	$7.64
Acme	Prop	Fake rock	C-001	Crate	$200	$4.55
Acme	Explosive	TNT	C-124	Stick	$89	$0.79
Acme	Explosive	TNT	C-124	Half-stick	$89	$0.40
Acme	Explosive	Nitroglyserin	C-089	Stick	$40	$0.79

In the report I need to show this as a drill-down table, with the measures down on the lowest level (Item) summed up on every level, and the aggregated measure (BalanceAmount) summed up on every level where it makes sense.

The problem is that if you use the common SUM function the report would sum up all BalanceAmounts on the Account level resulting in a BalanceAmount of $1000 for Account C-001, not $200 which is the correct value (that would be $200, Einstein).

What you really need is something like CountDistinct, but just for Sum. In fact, this is a specific case of a more general problem where you need to conduct some aggregation on some scope. How do I do something like that?

It's not really hard. What I need is some way to make just the first instance of a value in whatever scope needed be the counting one. To get this I enter the
following into the Code tab of you Report properties:

    Dim scopes As System.Collections.Hashtable
  Function getDistinct(ByVal checkMe As Object, ByVal scope As String) As Boolean
      Dim firstTimeSeen As Boolean

      If (scopes Is Nothing) Then
          scopes = New System.Collections.Hashtable
      End If

      If (Not scopes.Contains(scope)) Then
          scopes.Add(scope, New System.Collections.ArrayList)
      End If

      If (Not CType(scopes(scope), System.Collections.ArrayList).Contains(checkMe)) Then
          firstTimeSeen = True
          CType(scopes(scope), System.Collections.ArrayList).Add(checkMe)
      Else
          firstTimeSeen = False
      End If

      Return firstTimeSeen
  End Function

The usage pattern to get SumDistinct in this case is:

=SUM(IIF(Code.getDistinct(Fields!account.Value, "scopeId"), Fields!BalanceAmount.Value, 0))

The "scopeId" string identifies the current scope, so it will change from group to group. E.g. in the Firm group you'd enter "firm", in the ProductType group you'd enter "prodType", etc.

So what am I doing here? We're remembering the values of the checkMe parameter in the context of the scope, and returning True in only the first instance. Thus we can just sum the first of every checkMe value. You could use this to do your own CountDistinct by entering the following expression (but this would be a bit roundabout for that use-case):

=COUNT(IIF(Code.getDistinct(Fields!account.Value, "scopeId"), Fields!BalanceAmount.Value, 0))

I hope you get some use out of this. This kind of code is easy to crank out, but even easier to just copy-paste.

The 21 Laws of Computer Programming

These had me in stitches. Particularly number 19: "If you automate a mess, you get an automated mess". So true, and taken with another favourite saying of mine, "If it's worth doing once it's worth automating" we've got a true mess on our hands :)

Read 21 laws of computer programming

The Great Office War

Epic:

The Great Office War from Runawaybox on Vimeo.

DropDownList with a blank item on top

The DropDownList (DDL) is a nice little databindable control in ASP.Net. The easiest way to use it is to databind it to some value from your database and let the user select.

The problem with straight on databinding is that the first item in the DDL will be the first item in the databound collection (naturally), thus making choosing that item "a little too easy" and "a little too hard". When the user wants to select the top item you might be in for problems, as that selection won't fire off a SelectedIndexChanged -event, which is what you'd normally listen for.

There are ways around this - I've seen several suggestions. None of these are even starters in my opinion:

• Don't handle changes in the DDL, read from it on some other event (typically a button)
• This makes it very hard to create responsive UIs, as your user will always have to keep clicking buttons
• Set whatever you want to happen on changes in the DDL as if the first choice was already chosen (pre-choose for the user)
• Badness - especially in a stateless media like the web - your user may never correct your initial (possibly wrong) assumption
  
• Add an empty record in the databound object (typically your database)
• Perhaps the worst idea I've seen. The database should not contain filler like this. It's a bit better if you're working with some transient object - but still it's a hack. We don't like hacks.

The way to fix this problem is really not very hard. What you want is an empty item on the top of the list that the user will not expect to work, with a known value you can check for in your SelectedIndexChanged handler.

To do this add a ListItem to the DDL in the page/control's definition with your sentinel value and an empty string as the Text property. Normally this item would disappear on databinding, but wait: set the AppendDataBoundItems property on the DDL to True, and your empty initial value will survive!

Two things to beware: Make sure you check for your sentinel value in the handler, and remember to clear all but the initial item of the DDL's ItemListCollection if you're databinding that control again later (unless you want to keep appending).

Here's your illustrative code:
A standard DDL:

    <asp:DropDownList id="ddBasic" runat="server" autopostback="True">
         <!-- Selecting the top item will not fire an event (it will be pre-selected) -->
    </asp:DropDownList>

A DDL with the empty top-item:

    <asp:DropDownList id="ddWithEmptyTop" runat="server" autopostback="True" appenddatabounditems="True">
        <asp:ListItem value="-1" text="">  </asp:ListItem>
    </asp:DropDownList>

Technorati Tags: asp.net, dropdownlist, databinding, ui